The StarBoard QS3 PRO is a 75-inch interactive flat panel display designed for educational environments. It features a 4K UHD resolution of 3840x2160 at 60Hz on an IPS panel, providing a wide 178° viewing angle so students can see the content clearly from anywhere in the room. The screen is protected by 4mm tempered glass with an anti-glare and anti-fingerprint coating, ensuring the display remains legible and clean during heavy use. With a brightness of 450 nits and a contrast ratio of 5000:1, the visuals remain vivid and sharp. Under the hood, the system runs on Android 16.0 (EDLA) powered by an RK3576 Octacore processor, 8GB of RAM, and 128GB of storage. This hardware supports smooth multitasking and the use of included software like SBS Note and iMagic. Connectivity is extensive, featuring WiFi 6 and Bluetooth 5.4, alongside a wide array of ports including HDMI 2.0, USB-C with 100W power delivery on the front, and an OPS slot for additional computing modules. An 8-microphone array with a 9-meter range and noise cancellation allows for clear audio capture, complemented by two 20W HiFi speakers and a subwoofer for full sound. Interaction is handled by infrared technology with zero air gap, supporting up to 50 touch points with a response time under 3ms. You can write naturally using either a finger or a pen with sub-millimeter accuracy. The unit is housed in a sturdy metal back cover with a full magnetic bottom and weighs approximately 50 kg, making it a substantial centerpiece for any modern classroom or training center.