The Hikoki DH26PC2 is a versatile rotary hammer designed for demanding drilling and chiselling tasks. Powered by an 830W motor, it delivers 2.9 J of impact energy with a rate of up to 4,300 impacts per minute and a no-load speed reaching 1,100 rpm. You can switch between three operating modes—rotation only, rotation with hammering, and hammering only—to handle different materials, including concrete up to 26mm, steel up to 13mm, and wood up to 32mm, while also supporting core bits up to 50mm. Its physical design focuses on usability and longevity, featuring an SDS-plus chuck with one-push bit mounting and a large change lever for quick tool swaps. To keep the internal components clean, labyrinth ventilation windows reduce the amount of dust entering the motor. The tool is balanced for comfort, weighing 2.8kg and including an elastomer-covered side handle that helps dampen vibrations, which are measured at 14.3m/s² during hammer drilling and 11.3m/s² when chiselling. An angle adjustment function allows you to position the chisel for the most effective strike. This tool is well-suited for tradespeople or homeowners tackling masonry work, as it combines power with ergonomic details that reduce fatigue. It comes with a depth gauge for precision and a carrying case to keep the unit and its side handle organized and protected during transport.